Three Phase in Single Phase out UPS | 10KVA/8KW | 192Vdc | Pure Sine Wave Output
Prostar SP10K three phase input single phase output ups system 10kva promises efficient and economical operation with a flexible power system. Matching ancillary cabinets provide the ability to meet specific demands for run time, bypass and parallel requirements.
Prostar SP10K three phase input single phase output ups system 10kva is a three-phase, double-conversion online UPS that provides a complete power protection solution. In a footprint that is up to 75 percent smaller than comparable UPSs, an integrated power distribution module and a maintenance bypass switch.
Three phase input single phase output ups has been designed as combined advanced IGBT technology with hi-frequency wider-modulated technology (PWM), which make customer could obtain hi-quality power output and optimized efficiency under each operation load.
Prostar three phase in single phase out UPS is possible to parallel up to 2 units UPS to build out redundancy or add capacity with less space than a typical large UPS requires.
Groups of new microprocessor (CPU) co-ordination,which can precisely control the parameters of UPS and its full control,providing sufficient computing power, to ensure UPS always in top working condition.
LCD dot matrix display,which visually indicated the UPS’s operating parameters.LED displays the working status of UPS,and the LCD + LED combinations could make you get the UPS running status clearly and quickly.
Through the communication interface,with the monitoring software,which can directly monitor UPS on the computer,simplified power management;optional adapter remote monitor (SNMP card),with a variety of operating system and application software,as well as TCP / IP , SNMP,HTTP and other protocol support,which meets the users′requirements to monitor UPS via network, this is more suitable for decentralized users to centralized manage,thereby achieving the real global Management. Offers multiple audible and visual alarms to immediately alert you to an input voltage fluctuation (buck/boost), output overload, low battery or replace battery condition.
It has strong ability in parallel and does not need to set the quantity of parallel, it can be arbitrary online parallel expansion or N + 1 redundancy in parallel. Parallel UPS will share the same group batteries.
Adopts a three-stage charging method, which is good for recovery for the deep discharge of the battery.Independent current sharing and parallel charger, which can increase he capacity according to request.It can guarantee the charging request for the long backup UPS system.With the battery reverse connect protection, short circuit protection and over temperature protection, and other functions.
|Noise||48dB~54dB(Distance 1 Meter)|
|Voltage||380Vac/400Vac/4150Vac ± 25%|
|Voltage||220Vac/230Vac/240Vac ± 1%|
|Harmonic Distortion||Linear load<3%, Non-linear load<5%|
|Overload Capacity||110%≥300Min, 125%≥10Min, 150%≥1Min|
|Wave Form||Pure sine wave|
|Type||Support VRLA Battery|
|Max. Charging Current||0.2AxC10|
|Protection||Input over-voltage, under-voltage; output overload, shortcircuit; Inverter over-temperature; Battery under-voltage,over-voltage|
|Parallel Mode||N+1 can be in parallel with differenct power capacity|
|Meantime Between Failures||300,000Hours|
|Operating Temperature||0℃ to 40℃|
|Altitude||<1000m (with increase of 100m,it will reduce output of 1%) max. 4000m|
|Storage Temperature||-15℃ to 50℃|
|SNMP||Power managemetn from SNMP manager and web browser|