Rack Mountable Line Interactive UPS | 500VA/300W | 2U | 12VDC or 24VDC | 220Vad/230Vac/240Vac | Single Phase
Prostar PLR0.5K line interactive ups 500va rack mount 12V 24V is one of the most efficient power supply systems with full protection.
Prostar Line interactive UPS is a full digital control of the design concept, application of intelligent CPU control System, combined with CMOS and PWM perfect, adopt frequency online interactive structure, built in power Intelligent charger novel uninterruptible power supply products.
This line interactive ups connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, surges and line noise. Ideal solution for point-of-sale applications, VoIP systems and small business networks.
Fig. 1 2U / 3U Rack Mountable Line Interactive
Machine with CPU control, all the operational parameters of UPS are controlled by the CPU, ensuring the UPS is in the best working condition. Improved the accuracy of the product parameter, ensured full compliance of product performance, the product failure rate effectively reduce.
Built-in smart charger, with TOP charge type (charging type of high current at the initial, and balanced type and floating type alternating charging), shorten the battery charging time, extend the battery life, and it is suit to the areas of high rate power cut. And the users can set charging voltage and charging current by press button.
Interactive structural design, low frequency type program, with superior shock resistance. To satisfy the demand for different type of load, this might be widely used in household, commercial, industrial, outdoor base station.
Prostar line interactive takes muti-level protection mode of output, which could resisit the impact effectively, and also with the short circuit protection function, which could enhance its reliability.
|Power Amplifier Over Current||This system is equipped with the detection of the working current of power amplifier tube. When the detection current over large, the system will automatically enter current limiting working mode, meanwhile it displays the fault code E01.|
|Output Short Circuit Protection||When the machine is shorted circuit, the system will shut down and display fault code: E02. After removed the fault, it needs to be started manually.|
|Overload Protection||When the charge or inverter overload, the machine will enter the protection state, and display fault code: E03, including hardware protection and software protection.|
|Over Temperature Protection||When the machine internal temperature is too high, the machine will enter the over-temperature protection state, and display fault code: E04.|
|Battery Over Voltage Protection||In order to avoid the wrong way battery connection or the controller and charger fault caused system damage, when the system detects that battery voltage is over high, it will automatically shut down and display fault code: E05.|
|Low Battery Voltage Protection||To avoid excessive battery discharge, the machine will automatically shut down the system and display fault code: E06.|
|Phase Reverse Protection||When the system detects internal phase error, it will alarm and display fault code: E07.|
|Low Output Voltage Protection||When the system detects that the output voltage of system is over low, the inverter will automatically shut down and display fault code: E08.|
|Hardware Protection||When entering the hardware protection, the over current protector jumps off and needs to press the over current protector button before the machine can work again.|
|Software Protection||When entering the software protection, the machine will shut down automatically through the software control. At this time, the user needs to start the machine manually.|
While the main power is abnormal, the battery will supply power instead till low-voltage appeared, and then UPS shut down; when the main power come back, the UPS will start working automatically, and it will charge for the battery at the same time. No need to turn on the UPS manually.
When AC power is normal, the inverter is under dormant status, the main power through the built-in voltage regulator (AVR) directly to supply power to the loads, and its efficiency is as high as 98%. Therefore it is called “Green UPS” which in full compliance with the spirit of low carton.
Line interactive UPS pure sinewave output provides maximum stability and superior compatibility with sensitive equipment. Pure sine wave power is required by some equipment power supplies and prevents others from overheating, malfunctioning or failing prematurely.
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes. Supports multiple advanced user setup and operating preferences.
LCD Display Icons
|INPUT Vac||Indicates the AC input voltage.|
|BATT Vdc||Indicates the battery voltage.|
|OUTPUT Vac||Indicates the output voltage.|
|INPUT Hz||Indicates the AC input frequency.|
|BATT %||Indicates the battery capacity.|
|OUTPUT %||Indicates output loading.|
|Indicates battery level by 0-24%, 25-49%, 50-74% and 75-100% in battery mode and charging status in line mode.|
|In AC mode, it will present battery charging status.|
In battery mode, it will present battery capacity.
| ||Indicates the load level by 0-24%, 25-50%, 51-74% and 75-100%.|
|Shows unit connects to the utility power.|
|Indicates the utility charger circuit is working.|
|Shows the DC/AC inverter circuit is working.|
|The working mode number.|
|Indicates unit alarm is disabled.|
Fig. 3 2U Rack Mounted Line Interactive UPS Front Panel
Fig. 4 2U Rack Mounted Line Interactive UPS Rear
Fig. 5 Line Interactive UPS LCD Display
Multi-stage charging: smart chip control of the three-stage battery charge management function, can quickly fill the battery, and effectively extend the battery life.
Charging current optional: regarding to their own configuration of the battery AH， the users select the corresponding charge current (from 0% -100% in 20 steps adjustable).
Charging voltage optional: for a variety of battery charging voltage: lead acid batteries, GEL batteries, Lithium batteries
|Mode 1||Regular Mode||The system always keeps output.|
|Mode 4||Energy Saving|
|The system always keeps output.|
|Product Tags:||ups 500va||line interactive ups 500va||500va|
|Voltage Range||100V/110V/120V/127AC or 208V/220V/230V/240VAC(+25%,-36%)|
|Frequency Range||50/60 Hz±2.5Hz Auto|
|AC Voltage Regulation||100V/110V/120V/127AC±0.5% or 208V/220V/230V/240VAC±0.5%（AC Mode±10%）|
|Frequency||50HZ/60HZ±0.5HZ Auto（AC Mode±2.5HZ）|
|Transfer Time||8ms default, 4ms optional|
|Floating Charge Voltage||13.6VDC||27.2VDC|
|AC Charge Current||0-20A Adjustable (20A default)|
|Output Short Circuit||AC mode:Jump fuse, UPS mode: Shut down|
|Overload||Full load 100%, UPS alarm. Overload 120%, UPS shut down output in 10s. Once the load back to normal, UPS recover output.|
|High AC Voltage||Turn off AC,turn to UPS mode automatically|
|Low DC Voltage||UPS shut down automatically,Once the AC recover, UPS turn on and charge automatically|
|Over Temperature||Power Off|
|Temperature||-10℃ ~ 50℃|
|Communication||RS232(default),USB, 485, SNMP (Optional)|
|Dimension, DxWxH (mm)||483×390×88 [2U]|
|Net Weight (Kgs/PC)||6.80|
|Product specifications are subject to change without further notice.|