battery 12v 80ah

Prostar GPT80-12 lead acid front terminal telecom battery 12v 80ah

Front Terminal Telecom Battery | 12V 80AH | Maintenance-free |Dimension: 562x114x188x188mm

SKU: GPT80-12 Categories: ,

Prostar GPT80-12 lead acid front terminal telecom battery 12v 80ah has been specially designed for Applied in 19 foot and 23 foot standard power cabinet, Network connection equipment of communication system,Power source system for franchised network, LAN , UPS and back-up power sources.

Fron terminal battery 12v 80ah uses exclusive IPF technology optimizing power capacity, cell consistancy and long term reliability. Spcae saving Absorbed Glass Mat (AGM) construction allows a -48VDC string to fit in standard 23″ telecom rack systems. The quality standard for long term reliability in all wireleine and wireless carrier application, Prostar has the best reputation in the industry as the design life battery technology leader.

Front Terminal series batteries are designed with a narrow profile and front mounted terminals allowing them to fit into compact spaces that standard batteries cannot.In addition, Prostar front terminal batteries can be layed flat and placed in non ventilated areas, providing an even greater amount of options for fitting your batteries.

battery 12v 80ah

Features of Front Terminal Battery

1. Sealed/Maintenance-free

Absorbent Glass Mat (AGM) technology ensures efficient gas recombination up to 99% and freedom from electrolyte maintenance. During the expected float service life of Prostar batteries, no need to check the specific gravity of the electrolyte or add water.

Prostar sealed lead acid batteries can be operated in virtually any orientation without the loss of capacity or electrolyte leakage. However, upside down operation is not recommended.

2. Long Float Service Life

Front terminal battery can be used over 8 years in float using at 25C temperature with a unique corrosion-resistant grid alloy.

3. High Energy Density

Front terminal telecom battery 12v 80ah offers high reliability and delivers superior performance while occupying less space and increasing energy density.

4. Deep Discharge Recovery

Special separators, advanced plate composition and a carefully balanced electrolyte system ensure that the battery has the ability to recover from excessively deep discharge.

5. Economical

The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery; they are readily available and low in cost.

6. Easy Handling

No special handling precautions or shipping containers, surface or air, are required due to the leak-proof construction.

7. Compact

Prostar batteries utilize state of the art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density results in superior power/volume and power/weight ratios.

8. Low Pressure Valve Regulators

All batteries feature a series of low pressure one-way relief valves. These valves safely release any excessive accumulation of gas inside the battery and then reseal.

9. High Discharge Rate

Low internal resistance allows discharge currents of up to 10 times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.

10. Rugged Construction

The high impact resistant battery case is made of non-conductive ABS plastic. The case materials impact great resistance to shock, vibration, chemicals and heat.

Battery Construction

Battery Construction

Terminal

Depending on the model, batteries come either with AMP Faston type terminals made of tin plated brass, post type terminals of the same composition with threaded nut and bolt hardware, or heavy duty flag terminals made of lead alloy.

Electrolyte

Immobilized dilute sulfuric acid: H2S04.

Leakproof Design & Operational Safety

The leak proof construction of Prostar batteries has ensured that our batteries have been approved for shipment by air.

Plates (electrodes)

Prostar utilizes the latest technology and equipment to cast grids from a lead-calcium alloy free of antimony. The small amount of calcium and tin in the grid alloy imparts strength to the plate and guarantees durability even in extensive cycle service. Lead dioxide paste is added to the grid to form the electrically active material.

Relief valve

In case of excessive gas pressure build-up inside the battery, the relief valve will open and relieve the pressure. The one-way valve

not only ensures that no air gets into the battery where the oxygen would react with the plates causing internal discharge, but also represents an important safety device in the event of excessive overcharge.

Vent release pressure is between 2-6 psi; the seal ring material is neoprene rubber.

Leakproof Design & Operational Safety

The leak proof construction of Prostar batteries has ensured that our batteries have been approved for shipment by air.

Container

Case and lid material is ABS, high impact, resin with high resistance to chemicals and flammability. Case and cover are made of non-conductive ABS plastic.

This case has molded-in dividers for each 2 volt cell.

Separators

Prostar battery separators are made of non-woven glass fiber cloth with high heat and oxidation resistance. The material further offers superior electrolyte absorption and retaining ability, as well as excellent ion conductivity.

Case Sealing

Depending on the model the case sealing is ultrasonic, epoxy or heat seal.

Performance Characteristics

battery performance characteristics

battery performance characteristics

Battery Applications

  • Automotive and traction applications.
  • Standby/Back-up/Emergency power for electrical installations.
  • Network connection equipment of communication system
  • For standard 19 inch or 23 inch power cabinets
  • UPS (Uninterruptible Power Supplies)
  • Lighting
  • High current drain applications.
  • Sealed battery types available for use in portable equipment.
  • Grid scale energy storage

Battery Terminal

Battery Terminal

Battery Terminal

Battery Terminal

Request Product Price

Caracteristicas

Voltaje nominal 12V
Capacidad nominal (20 tarifa por hora) 80Ah
Capacidad

25℃(77°F)

10 tarifa por hora (7.61A) 76.1Ah
5 tarifa por hora (14.3A) 71.5Ah
1 tarifa por hora (52.8A) 52.8Ah
Resistencia interna Batería completamente cargada 25℃ ≤6.4mΩ
Capacidad afectada por la temperatura

(10 hour )

40℃ (104°F) 102%
25℃ (77°F) 100%
0℃ (32°F) 85%
-15℃ (5°F) 65%
Autodescarga

25℃(77°F) Capacity

después de 3 meses de almacenamiento 90%
después de 6 meses de almacenamiento 80%
después de 12 meses de almacenamiento 62%
Carga (voltaje constante)

25℃(77°F)

Flotador Corriente de carga inicial inferior a 16 A

Voltaje 13.6-13.8V

Ciclo Corriente de carga inicial inferior a 16 A

Voltaje 14.4-14.9V

embalaje

Dimensiones de la batería Longitud 562mm
Anchura 114mm
Altura 188mm
Altura total 188mm
Dimensiones de la caja Longitud 573mm
Anchura 129mm
Altura 248mm
Cantidad por caja 1 PC per box
Peso neto por celda 28.5 kg±300g
Peso neto por caja 28.5kg
Peso bruto 29.1kg

Descarga de corriente constante por celda (Amperios a 77 ° F 25 ° C)

F.V/Time 5min 10min 15min 30min 45min 1h 2h 3h 5h 8h 10h 20h
1.60V 228.8 176.0 132.4 88.0 61.6 52.8 33.0 22.6 15.1 10.14 8.38 4.40
1.65V 224.6 172.8 130.0 86.4 60.5 51.8 32.4 22.2 14.8 9.95 8.22 4.32
1.70V 220.5 169.6 127.6 84.8 59.4 50.9 31.8 21.8 14.5 9.77 8.07 4.24
1.75V 216.3 166.4 125.2 83.2 58.2 49.9 31.2 21.4 14.3 9.58 7.92 4.16
1.80V 208.0 160.0 120.4 80.0 56.0 48.0 30.0 20.6 13.7 9.21 7.61 4.00

Descarga de energía constante por celda (vatios a 77 ° F 25 ° C)

F.V/Time 5min 10min 15min 30min 45min 1h 2h 3h 5h 8h 10h 20h
1.60V 440.4 338.8 254.9 169.4 118.6 101.6 63.5 43.5 29.0 19.5 16.1 8.5
1.65V 432.4 332.6 250.3 166.3 116.4 99.8 62.4 42.7 28.5 19.2 15.8 8.3
1.70V 424.4 326.5 245.7 163.2 114.3 97.9 61.2 42.0 28.0 18.8 15.5 8.2
1.75V 416.4 320.3 241.0 160.2 112.1 96.1 60.1 41.2 27.4 18.4 15.2 8.0
1.80V 400.4 308.0 231.7 154.0 107.8 92.4 57.8 39.6 26.4 17.7 14.7 7.7